P Sharma1, K Prasad, S Khokhar. 1. Dr. R.P. Centre for Ophthalmic Sciences, All India Institute of Medical Sciences, New Delhi.
Abstract
PURPOSE: To evaluate the cyclofusional status in normal and acquired superior oblique palsy subjects. To know the extent to which cyclodeviations can be tolerated asymptomatically. METHOD: Incyclovergence and excyclovergence break points and recovery points were evaluated in 40 normal subjects and 17 cases of acquired superior oblique palsy. A Polaroid dissociation stereoprojector was used with special torsional slides at fixation distances of 1 meter and 6 meters. In addition, maximum intorsion tolerated (MIT) and maximum extorsion tolerated (MET), ie, the torsion that allowed baseline horizontal fusion, were studied. The evaluation was repeated in the palsy group 1 month after recovery, which was spontaneous in 8 cases, and after surgery in 9 cases. RESULT: The normal values for incyclovergence and excyclovergence were in the range of 12 degrees (break point) and 8 degrees (recovery point). In the case of superior oblique palsy, only the incyclovergence recovery point was significantly diminished (p=.004), which improved after recovery to near normal values. The intorsion tolerance (MIT) and extorsion tolerance (MET) also showed deterioration in the palsy group. After recovery, the MIT normalized but the MET did not recover at 1-meter distance fixation. The maximum torsional tolerance values appear to be more critical. CONCLUSION: The cyclofusional vergence under physiological conditions are better than reported earlier. But MIT and MET are better indicators of cyclofusional potential. These low values demand more precise alignment of the torsion in weakening or strengthening surgery of the oblique muscles.
PURPOSE: To evaluate the cyclofusional status in normal and acquired superior oblique palsy subjects. To know the extent to which cyclodeviations can be tolerated asymptomatically. METHOD: Incyclovergence and excyclovergence break points and recovery points were evaluated in 40 normal subjects and 17 cases of acquired superior oblique palsy. A Polaroid dissociation stereoprojector was used with special torsional slides at fixation distances of 1 meter and 6 meters. In addition, maximum intorsion tolerated (MIT) and maximum extorsion tolerated (MET), ie, the torsion that allowed baseline horizontal fusion, were studied. The evaluation was repeated in the palsy group 1 month after recovery, which was spontaneous in 8 cases, and after surgery in 9 cases. RESULT: The normal values for incyclovergence and excyclovergence were in the range of 12 degrees (break point) and 8 degrees (recovery point). In the case of superior oblique palsy, only the incyclovergence recovery point was significantly diminished (p=.004), which improved after recovery to near normal values. The intorsion tolerance (MIT) and extorsion tolerance (MET) also showed deterioration in the palsy group. After recovery, the MIT normalized but the MET did not recover at 1-meter distance fixation. The maximum torsional tolerance values appear to be more critical. CONCLUSION: The cyclofusional vergence under physiological conditions are better than reported earlier. But MIT and MET are better indicators of cyclofusional potential. These low values demand more precise alignment of the torsion in weakening or strengthening surgery of the oblique muscles.
Authors: Antony Arokiadass Baskaran; Tanuja Britto; Sundaresan Rajkumar; Philip A Thomas; C A Nelson Jesudasan Journal: Indian J Ophthalmol Date: 2019-05 Impact factor: 1.848