Literature DB >> 10481630

Development of a draft British standard: the assessment of heat strain for workers wearing personal protective equipment.

M A Hanson1.   

Abstract

Existing methods for estimating heat stress, enshrined in British/International Standards (the Wet Bulb Globe Temperature (WBGT) index [BS EN 27243] and the Required Sweat Rate equation [BS EN 12515; ISO 7933 modified]), assume that the clothing worn by the individual is water vapour permeable; the WBGT index also assumes that the clothing is relatively light. Because most forms of personal protective equipment (PPE) either have a higher insulative value than that assumed or are water vapour impermeable, the Standards cannot be accurately applied to workers wearing PPE. There was, therefore, a need to develop a British Standard which would allow interpretation of these existing Standards for workers wearing PPE. Relevant information was obtained through reviewing the literature and consulting experts. Two questionnaire surveys of potential users of the Standards were conducted, and physiological data collected both experimentally and in work situations were considered. The information collected was used to develop the draft British Standard. It provides information and data on: The general effect of PPE on heat balance of the body (the ability of the body to maintain its 'core' temperature within an acceptable range). The effect of specific forms of PPE on metabolic heat production rate. The thermal insulation and evaporative resistance of types of PPE. The effect of the closure of the garments to the body on heat transfer. The effect of the PPE on the proportion of the body covered. The effect of an air supply (for example, Breathing Apparatus [BA]) to the wearer. Guidance is given on conducting an analysis of the work situation, taking account of the impact of PPE. Detailed methods of interpreting both BS EN 27243 and BS EN 12515 for workers wearing PPE are given, taking account of the factors listed above. Three worked examples using BS EN 27243 and BS EN 12515 are given in the Annex of the draft Standard.

Entities:  

Mesh:

Year:  1999        PMID: 10481630

Source DB:  PubMed          Journal:  Ann Occup Hyg        ISSN: 0003-4878


  5 in total

Review 1.  Impact of clothing on exercise in the heat.

Authors:  Jon-Kyle Davis; Phillip A Bishop
Journal:  Sports Med       Date:  2013-08       Impact factor: 11.136

2.  A Review of Mine Rescue Ensembles for Underground Coal Mining in the United States.

Authors:  F Selcen Kilinc; William D Monaghan; Jeffrey B Powell
Journal:  J Eng Fiber Fabr       Date:  2014       Impact factor: 1.573

3.  Facial Skin Temperature and Discomfort When Wearing Protective Face Masks: Thermal Infrared Imaging Evaluation and Hands Moving the Mask.

Authors:  Antonio Scarano; Francesco Inchingolo; Felice Lorusso
Journal:  Int J Environ Res Public Health       Date:  2020-06-27       Impact factor: 3.390

4.  Enhanced protection face masks do not adversely impact thermophysiological comfort.

Authors:  Farzan Gholamreza; Anupama Vijaya Nadaraja; Abbas S Milani; Kevin Golovin
Journal:  PLoS One       Date:  2022-04-07       Impact factor: 3.240

5.  The impact of theory-based educational intervention on improving helmet use behavior among workers of cement factory, Iran.

Authors:  Hamid Jafaralilou; Iraj Zareban; Mohammad Hajaghazadeh; Habibeh Matin; Alireza Didarloo
Journal:  J Egypt Public Health Assoc       Date:  2019-01-07
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.