Literature DB >> 10456522

Osseointegration of preformed polymethylmethacrylate craniofacial prostheses coated with bone marrow-impregnated poly (DL-lactic-co-glycolic acid) foam.

D Dean1, N S Topham, C Rimnac, A G Mikos, D P Goldberg, K Jepsen, R Redtfeldt, Q Liu, D Pennington, R Ratcheson.   

Abstract

Osseointegration of bone marrow-PLGA-coated, preformed polymethylmethacrylate cranioplasties offers the possibility of reducing: operative time, periimplant seroma and infection, metallic fixation, and periprosthetic resorption following surgical skull remodeling. These alloplastic materials are FDA-approved but previously have not been used together to promote cranioplasty incorporation. The objective of this study was to determine whether the use of PLGA foam coating improves host osseointegration of preformed, textured, polymethylmethacrylate prosthetic cranioplasties. A critical-sized cranial defect was created in two groups of 10 and one group of three rabbits. The defect was filled with either a textured, preformed polymethylmethacrylate disc or a textured, preformed polymethylmethacrylate disc coated with poly (DL-lactic-co-glycolic acid). Both implants were immersed in autologous bone marrow for 20 minutes before implantation. Half of each group of 10 were killed at 3 weeks, and the remainder at 6 weeks. A third group of three rabbits with excised periosteum was evaluated at 6 weeks. Histologic analysis of the discs determined relative amounts of cancellous bone formation adjacent to the prostheses. Woven trabecular bone was present at each host bone to implant perimeter interface at 3 weeks, with fine fibrous capsular formation around the implants. Thicker, lamellar trabeculae were present at 6 weeks with an increased fibrous layer surrounding both types of implants. Bone formed on the superficial and deep implant surfaces in a noncontiguous fashion. Two of five measures showed that total bone formation was significantly greater in the PLGA-coated implants. Polymethylmethacrylate discs coated with bone marrow-impregnated PLGA foam demonstrate increased bone formation at 3 and 6 weeks as compared with non-coated preformed polymethylmethacrylate discs. Only implants with preserved periosteum showed bone formation away from the host-implant interface (centrally) on the superficial surface at 6 weeks.

Entities:  

Mesh:

Substances:

Year:  1999        PMID: 10456522     DOI: 10.1097/00006534-199909030-00014

Source DB:  PubMed          Journal:  Plast Reconstr Surg        ISSN: 0032-1052            Impact factor:   4.730


  5 in total

Review 1.  A review of reconstructive materials for use in craniofacial surgery bone fixation materials, bone substitutes, and distractors.

Authors:  James Tait Goodrich; Adam L Sandler; Oren Tepper
Journal:  Childs Nerv Syst       Date:  2012-08-08       Impact factor: 1.475

2.  Conditioning of 3D Printed Nanoengineered Ionic-Covalent Entanglement Scaffolds with iP-hMSCs Derived Matrix.

Authors:  Candice Sears; Eli Mondragon; Zachary I Richards; Nick Sears; David Chimene; Eoin P McNeill; Carl A Gregory; Akhilesh K Gaharwar; Roland Kaunas
Journal:  Adv Healthc Mater       Date:  2020-03-08       Impact factor: 9.933

3.  Biomechanical Evaluation of Patient-Specific Polymethylmethacrylate Cranial Implants for Virtual Surgical Planning: An In-Vitro Study.

Authors:  Bilal Msallem; Michaela Maintz; Florian S Halbeisen; Simon Meyer; Guido R Sigron; Neha Sharma; Shuaishuai Cao; Florian M Thieringer
Journal:  Materials (Basel)       Date:  2022-03-07       Impact factor: 3.623

4.  Multiple Delayed Scalp Reconstruction for Complicated Cranial Defects.

Authors:  Yoshiaki Sakamoto; Eric Arnaud
Journal:  Plast Reconstr Surg Glob Open       Date:  2016-08-11

5.  Fronto-orbital reconstruction using polymethyl methacrylate implant.

Authors:  Samiran Ghosh; Debolina Pramanick; Amit Ray; Richi Burman; Ashistaru Saha
Journal:  Natl J Maxillofac Surg       Date:  2017 Jul-Dec
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.