Literature DB >> 10450941

The effects of absorbed water on the properties of amorphous mixtures containing sucrose.

S L Shamblin1, G Zografi.   

Abstract

PURPOSE: To measure the water vapor absorption behavior of sucrose-poly(vinyl pyrrolidone) (PVP) and sucrose-poly(vinyl pyrrolidone co-vinyl acetate) (PVP/VA) mixtures, prepared as amorphous solid solutions and as physical mixtures, and the effect of absorbed water on the amorphous properties, i.e., crystallization and glass transition temperature, Tg, of these systems.
METHODS: Mixtures of sucrose and polymer were prepared by co-lyophilization of aqueous sucrose-polymer solutions and by physically mixing amorphous sucrose and polymer. Absorption isotherms for the individual components and their mixtures were determined gravimetrically at 30 degrees C as a function of relative humidity. Following the absorption experiments, mixtures were analyzed for evidence of crystallization using X-ray powder diffraction. For co-lyophilized mixtures showing no evidence of crystalline sucrose, Tg was determined as a function of water content using differential scanning calorimetry.
RESULTS: The absorption of water vapor was the same for co-lyophilized and physically mixed samples under the same conditions and equal to the weighted sums of the individual isotherms where no sucrose crystallization was observed. The crystallization of sucrose in the mixtures was reduced relative to sucrose alone only when sucrose was molecularly dispersed (co-lyophilized) with the polymers. In particular, when co-lyophilized with sucrose at a concentration of 50%, PVP was able to maintain sucrose in the amorphous state for up to three months, even when the Tg was reduced well below the storage temperature by the absorbed water.
CONCLUSIONS: The water vapor absorption isotherms for co-lyophilized and physically mixed amorphous sucrose-PVP and sucrose-PVPNA mixtures at 30 degrees C are similar despite interactions between sugar and polymer which are formed when the components are molecularly dispersed with one another. In the presence of absorbed water the crystallization of sucrose was reduced only by the formation of a solid-solution, with PVP having a much more pronounced effect than PVP/VA. The effectiveness of PVP in preventing sucrose crystallization when significant levels of absorbed water are present was attributed to the molecular interactions between sucrose, PVP and water.

Entities:  

Mesh:

Substances:

Year:  1999        PMID: 10450941     DOI: 10.1023/a:1018960405504

Source DB:  PubMed          Journal:  Pharm Res        ISSN: 0724-8741            Impact factor:   4.200


  8 in total

1.  Dissolution rates of high energy sulfathiazole--povidone coprecipitates II: characterization of form of drug controlling its dissolution rate via solubility studies.

Authors:  A P Simonelli; S C Mehta; W I Higuchi
Journal:  J Pharm Sci       Date:  1976-03       Impact factor: 3.534

2.  Enthalpy relaxation in binary amorphous mixtures containing sucrose.

Authors:  S L Shamblin; G Zografi
Journal:  Pharm Res       Date:  1998-12       Impact factor: 4.200

3.  Mixing behavior of colyophilized binary systems.

Authors:  S L Shamblin; L S Taylor; G Zografi
Journal:  J Pharm Sci       Date:  1998-06       Impact factor: 3.534

Review 4.  Pharmaceutical applications of solid dispersion systems.

Authors:  W L Chiou; S Riegelman
Journal:  J Pharm Sci       Date:  1971-09       Impact factor: 3.534

5.  Non-isothermal and isothermal crystallization of sucrose from the amorphous state.

Authors:  A Saleki-Gerhardt; G Zografi
Journal:  Pharm Res       Date:  1994-08       Impact factor: 4.200

6.  Sugar-polymer hydrogen bond interactions in lyophilized amorphous mixtures.

Authors:  L S Taylor; G Zografi
Journal:  J Pharm Sci       Date:  1998-12       Impact factor: 3.534

7.  Molecular mobility in mixtures of absorbed water and solid poly(vinylpyrrolidone).

Authors:  C A Oksanen; G Zografi
Journal:  Pharm Res       Date:  1993-06       Impact factor: 4.200

8.  The relationship between the glass transition temperature and the water content of amorphous pharmaceutical solids.

Authors:  B C Hancock; G Zografi
Journal:  Pharm Res       Date:  1994-04       Impact factor: 4.200

  8 in total
  14 in total

1.  Molecular motions in sucrose-PVP and sucrose-sorbitol dispersions: I. Implications of global and local mobility on stability.

Authors:  Sisir Bhattacharya; Raj Suryanarayanan
Journal:  Pharm Res       Date:  2011-04-18       Impact factor: 4.200

2.  Effects of vial packing density on drying rate during freeze-drying of carbohydrates or a model protein measured using a vial-weighing technique.

Authors:  Henning Gieseler; Geoffrey Lee
Journal:  Pharm Res       Date:  2007-11-13       Impact factor: 4.200

3.  Phase Behavior of Ritonavir Amorphous Solid Dispersions during Hydration and Dissolution.

Authors:  Hitesh S Purohit; Lynne S Taylor
Journal:  Pharm Res       Date:  2017-09-27       Impact factor: 4.200

4.  Evaluation of drug-polymer miscibility in amorphous solid dispersion systems.

Authors:  Alfred C F Rumondor; Igor Ivanisevic; Simon Bates; David E Alonzo; Lynne S Taylor
Journal:  Pharm Res       Date:  2009-09-22       Impact factor: 4.200

5.  Water-solid interactions in amorphous maltodextrin-crystalline sucrose binary mixtures.

Authors:  Mohamed K Ghorab; Scott J Toth; Garth J Simpson; Lisa J Mauer; Lynne S Taylor
Journal:  Pharm Dev Technol       Date:  2013-03-12       Impact factor: 3.133

6.  Effect of polymer content and molecular weight on the morphology and heat- and moisture-induced transformations of spray-dried composite particles of amorphous lactose and poly(vinylpyrrolidone).

Authors:  Jonas Berggren; Göran Alderborn
Journal:  Pharm Res       Date:  2003-07       Impact factor: 4.200

7.  Ability of different polymers to inhibit the crystallization of amorphous felodipine in the presence of moisture.

Authors:  Hajime Konno; Lynne S Taylor
Journal:  Pharm Res       Date:  2007-05-23       Impact factor: 4.200

8.  Effects of polymer type and storage relative humidity on the kinetics of felodipine crystallization from amorphous solid dispersions.

Authors:  Alfred C F Rumondor; Lindsay A Stanford; Lynne S Taylor
Journal:  Pharm Res       Date:  2009-10-06       Impact factor: 4.200

9.  Qualitative and Quantitative Characterization of Composition Heterogeneity on the Surface of Spray Dried Amorphous Solid Dispersion Particles by an Advanced Surface Analysis Platform with High Surface Sensitivity and Superior Spatial Resolution.

Authors:  Sonal V Bhujbal; Dmitry Y Zemlyanov; Alex Cavallaro; Sharad Mangal; Lynne S Taylor; Qi Tony Zhou
Journal:  Mol Pharm       Date:  2018-04-17       Impact factor: 4.939

10.  Drop Printing of Pharmaceuticals: Effect of Molecular Weight on PEG Coated-Naproxen/PEG3350 Solid Dispersions.

Authors:  Hsin-Yun Hsu; Scott Toth; Garth J Simpson; Michael T Harris
Journal:  AIChE J       Date:  2015-12       Impact factor: 3.993

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.