OBJECT: The authors sought to determine the biomechanics of the occipitoatlantal (occiput [Oc]-C1) and atlantoaxial (C1-2) motion segments after unilateral gradient condylectomy. METHODS: Six human cadaveric specimens (skull with attached upper cervical spine) underwent nondestructive biomechanical testing (physiological loads) during flexion-extension, lateral bending, and axial rotation. Axial translation from tension to compression was also studied across Oc-C2. Each specimen served as its own control and underwent baseline testing in the intact state. The specimens were then tested after progressive unilateral condylectomy (25% resection until completion), which was performed using frameless stereotactic guidance. At Oc-C1 for all motions that were tested, mobility increased significantly compared to baseline after a 50% condylectomy. Flexion-extension, lateral bending, and axial rotation increased 15.3%, 40.8%, and 28.1%, respectively. At C1-2, hypermobility during flexion-extension occurred after a 25% condylectomy, during axial rotation after 75% condylectomy, and during lateral bending after a 100% condylectomy. CONCLUSIONS: Resection of 50% or more of the occipital condyle produces statistically significant hypermobility at Oc-C1. After a 75% resection, the biomechanics of the Oc-C1 and C1-2 motion segments change considerably. Performing fusion of the craniovertebral junction should therefore be considered if half or more of one occipital condyle is resected.
OBJECT: The authors sought to determine the biomechanics of the occipitoatlantal (occiput [Oc]-C1) and atlantoaxial (C1-2) motion segments after unilateral gradient condylectomy. METHODS: Six human cadaveric specimens (skull with attached upper cervical spine) underwent nondestructive biomechanical testing (physiological loads) during flexion-extension, lateral bending, and axial rotation. Axial translation from tension to compression was also studied across Oc-C2. Each specimen served as its own control and underwent baseline testing in the intact state. The specimens were then tested after progressive unilateral condylectomy (25% resection until completion), which was performed using frameless stereotactic guidance. At Oc-C1 for all motions that were tested, mobility increased significantly compared to baseline after a 50% condylectomy. Flexion-extension, lateral bending, and axial rotation increased 15.3%, 40.8%, and 28.1%, respectively. At C1-2, hypermobility during flexion-extension occurred after a 25% condylectomy, during axial rotation after 75% condylectomy, and during lateral bending after a 100% condylectomy. CONCLUSIONS: Resection of 50% or more of the occipital condyle produces statistically significant hypermobility at Oc-C1. After a 75% resection, the biomechanics of the Oc-C1 and C1-2 motion segments change considerably. Performing fusion of the craniovertebral junction should therefore be considered if half or more of one occipital condyle is resected.
Authors: Elena d'Avella; Flavio Angileri; Matteo de Notaris; Joaquin Enseñat; Vita Stagno; Luigi Maria Cavallo; Joan Berenguer Gonzales; Alessandro Weiss; Alberto Prats-Galino Journal: Neurosurg Rev Date: 2014-02-05 Impact factor: 3.042
Authors: Wang Mingdong; Juan C Fernandez-Miranda; Roger Neves Mathias; Eric Wang; Paul Gardner; Hong Wang Journal: J Neurol Surg B Skull Base Date: 2017-04-18