Literature DB >> 10398040

Hydrolytic degradation characteristics of aliphatic polyesters derived from lactic and glycolic acids.

S Li1.   

Abstract

During the past decade, important advances have been made in the understanding of the hydrolytic degradation characteristics of aliphatic polyesters derived from lactic acid (LA) and glycolic acid (GA). Degradation of large poly(LAGA) (PLAGA) polymers is autocatalyzed by carboxyl end groups initially present or generated upon ester bond cleavage. Faster internal degradation and degradation-induced morphological and compositional changes are three of the most important findings deduced from the behaviors of various PLAGA polymers. This review presents the state of the art in this domain. The research efforts are focused on detailing the degradation mechanism and the effects of various factors on the degradation of PLAGA polymers. An attempt is also made to elaborate a scheme that can be used to predict degradation characteristics of these polymers from their initial composition and morphology. Copyright 1999 John Wiley & Sons, Inc.

Entities:  

Mesh:

Substances:

Year:  1999        PMID: 10398040     DOI: 10.1002/(sici)1097-4636(1999)48:3<342::aid-jbm20>3.0.co;2-7

Source DB:  PubMed          Journal:  J Biomed Mater Res        ISSN: 0021-9304


  65 in total

1.  Fiber reinforcement of a biomimetic bone cement.

Authors:  S Panzavolta; B Bracci; M L Focarete; C Gualandi; A Bigi
Journal:  J Mater Sci Mater Med       Date:  2012-04-21       Impact factor: 3.896

2.  Poly(ε-caprolactone) and poly(D,L-lactic acid-co-glycolic acid) scaffolds used in bone tissue engineering prepared by melt compression-particulate leaching method.

Authors:  Samuel H Barbanti; Arnaldo R Santos; Cecília A C Zavaglia; Eliana A R Duek
Journal:  J Mater Sci Mater Med       Date:  2011-07-21       Impact factor: 3.896

Review 3.  Drug transport to brain with targeted nanoparticles.

Authors:  Jean-Christophe Olivier
Journal:  NeuroRx       Date:  2005-01

4.  Degradation behavior of hydrophilized PLGA scaffolds prepared by melt-molding particulate-leaching method: comparison with control hydrophobic one.

Authors:  Se Heang Oh; Soung Gon Kang; Jin Ho Lee
Journal:  J Mater Sci Mater Med       Date:  2006-02       Impact factor: 3.896

5.  New hydrolysis-dependent thermosensitive polymer for an injectable degradable system.

Authors:  Zhanwu Cui; Bae Hoon Lee; Brent L Vernon
Journal:  Biomacromolecules       Date:  2007-03-20       Impact factor: 6.988

6.  Biodegradable crosslinked polyesters derived from thiomalic acid and S-nitrosothiol analogues for nitric oxide release.

Authors:  Janet P Yapor; Bella H Neufeld; Jesus B Tapia; Melissa M Reynolds
Journal:  J Mater Chem B       Date:  2018-05-10       Impact factor: 6.331

7.  An apical symphysial technique using a wide absorbable mesh placed on the apex for primary spontaneous pneumothorax.

Authors:  Kozo Nakanishi
Journal:  Surg Endosc       Date:  2009-03-19       Impact factor: 4.584

8.  Highly elastomeric poly(glycerol sebacate)-co-poly(ethylene glycol) amphiphilic block copolymers.

Authors:  Alpesh Patel; Akhilesh K Gaharwar; Giorgio Iviglia; Hongbin Zhang; Shilpaa Mukundan; Silvia M Mihaila; Danilo Demarchi; Ali Khademhosseini
Journal:  Biomaterials       Date:  2013-03-01       Impact factor: 12.479

9.  Hydrolytic Degradation and Erosion of Polyester Biomaterials.

Authors:  Lindsay N Woodard; Melissa A Grunlan
Journal:  ACS Macro Lett       Date:  2018-07-30       Impact factor: 6.903

10.  Diazeniumdiolate-doped poly(lactic-co-glycolic acid)-based nitric oxide releasing films as antibiofilm coatings.

Authors:  Wenyi Cai; Jianfeng Wu; Chuanwu Xi; Mark E Meyerhoff
Journal:  Biomaterials       Date:  2012-07-28       Impact factor: 12.479

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.