Literature DB >> 10364322

Packaging-competent capsids of a herpes simplex virus temperature-sensitive mutant have properties similar to those of in vitro-assembled procapsids.

F J Rixon1, D McNab.   

Abstract

Newcomb and coworkers (W. W. Newcomb, F. L. Homa, D. R. Thomsen, F. P. Booy, B. L. Trus, A. C. Steven, J. V. Spencer, and J. C. Brown, J. Mol. Biol. 263:432-446, 1996; W. W. Newcomb, F. L. Homa, D. R. Thomsen, Z. Ye, and J. C. Brown, J. Virol. 68:6059-6063, 1994) have recently described an in vitro herpes simplex virus (HSV) capsid assembly product which, because of certain parallels between its properties and those of bacteriophage proheads, they have designated the procapsid. As in their bacteriophage counterparts, there are marked differences between the structures of the two types of particle, and conversion from the procapsid to the capsid form requires extensive reconfiguration of the subunits. This reconfiguration occurs spontaneously upon extended in vitro incubation. One of the distinctive features of the HSV procapsids is that, unlike mature capsids, they are unstable and disassemble upon storage at 2 degrees C. Using a mutant of HSV type 1 (ts1201), which has a lesion in the protease responsible for maturational cleavage of the scaffolding protein, we have demonstrated that capsids present within cells infected at nonpermissive temperatures are also cryosensitive and disappear if the cells are incubated at 0 degrees C. This suggests that ts1201 capsids may resemble procapsids in structure. However, ts1201 capsids remain cryosensitive following extended incubation at an elevated temperature and, therefore, do not appear to undergo the spontaneous reconfiguration seen with in vitro-assembled procapsids. The lesion in ts1201 is reversible, and capsids formed at the nonpermissive temperature can undergo maturational cleavage and go on to form infectious virions following downshift to permissive temperatures. The sensitivity of ts1201 capsids to low temperatures is closely correlated with the cleavage status of the scaffolding protein, suggesting that proteolysis may act to trigger their conversion to the stable form. The experiments described here provide the firmest evidence yet that the procapsid has a biologically relevant role in the virus life cycle.

Entities:  

Mesh:

Substances:

Year:  1999        PMID: 10364322      PMCID: PMC112631     

Source DB:  PubMed          Journal:  J Virol        ISSN: 0022-538X            Impact factor:   5.103


  31 in total

1.  Capsid assembly and DNA packaging in herpes simplex virus.

Authors: 
Journal:  Rev Med Virol       Date:  1997-07       Impact factor: 6.989

2.  Biochemical studies of the maturation of herpesvirus nucleocapsid species.

Authors:  M L Perdue; J C Cohen; C C Randall; D J O'Callaghan
Journal:  Virology       Date:  1976-10-01       Impact factor: 3.616

3.  The 25 amino acid residues at the carboxy terminus of the herpes simplex virus type 1 UL26.5 protein are required for the formation of the capsid shell around the scaffold.

Authors:  J Kennard; F J Rixon; I M McDougall; J D Tatman; V G Preston
Journal:  J Gen Virol       Date:  1995-07       Impact factor: 3.891

4.  Herpes simplex virus DNA packaging without measurable DNA synthesis.

Authors:  G A Church; A Dasgupta; D W Wilson
Journal:  J Virol       Date:  1998-04       Impact factor: 5.103

5.  Identification of the sites of interaction between the scaffold and outer shell in herpes simplex virus-1 capsids by difference electron imaging.

Authors:  Z H Zhou; S J Macnab; J Jakana; L R Scott; W Chiu; F J Rixon
Journal:  Proc Natl Acad Sci U S A       Date:  1998-03-17       Impact factor: 11.205

6.  The protease of herpes simplex virus type 1 is essential for functional capsid formation and viral growth.

Authors:  M Gao; L Matusick-Kumar; W Hurlburt; S F DiTusa; W W Newcomb; J C Brown; P J McCann; I Deckman; R J Colonno
Journal:  J Virol       Date:  1994-06       Impact factor: 5.103

Review 7.  Molecular anatomy of herpesviruses: recent studies.

Authors:  D J O'Callaghan; C C Randall
Journal:  Prog Med Virol       Date:  1976

8.  Identification and characterization of a herpes simplex virus gene product required for encapsidation of virus DNA.

Authors:  V G Preston; J A Coates; F J Rixon
Journal:  J Virol       Date:  1983-03       Impact factor: 5.103

9.  The promoter, transcriptional unit, and coding sequence of herpes simplex virus 1 family 35 proteins are contained within and in frame with the UL26 open reading frame.

Authors:  F Y Liu; B Roizman
Journal:  J Virol       Date:  1991-01       Impact factor: 5.103

10.  Assembly of VP26 in herpes simplex virus-1 inferred from structures of wild-type and recombinant capsids.

Authors:  Z H Zhou; J He; J Jakana; J D Tatman; F J Rixon; W Chiu
Journal:  Nat Struct Biol       Date:  1995-11
View more
  33 in total

1.  ATP-Dependent localization of the herpes simplex virus capsid protein VP26 to sites of procapsid maturation.

Authors:  J H Chi; D W Wilson
Journal:  J Virol       Date:  2000-02       Impact factor: 5.103

2.  Intracellular Cre-mediated deletion of the unique packaging signal carried by a herpes simplex virus type 1 recombinant and its relationship to the cleavage-packaging process.

Authors:  C Logvinoff; A L Epstein
Journal:  J Virol       Date:  2000-09       Impact factor: 5.103

3.  Residues of VP26 of herpes simplex virus type 1 that are required for its interaction with capsids.

Authors:  Prashant Desai; Jean-Claude Akpa; Stanley Person
Journal:  J Virol       Date:  2003-01       Impact factor: 5.103

4.  pH reduction as a trigger for dissociation of herpes simplex virus type 1 scaffolds.

Authors:  David A McClelland; James D Aitken; David Bhella; David McNab; Joyce Mitchell; Sharon M Kelly; Nicholas C Price; Frazer J Rixon
Journal:  J Virol       Date:  2002-08       Impact factor: 5.103

5.  Mutation of single hydrophobic residue I27, L35, F39, L58, L65, L67, or L71 in the N terminus of VP5 abolishes interaction with the scaffold protein and prevents closure of herpes simplex virus type 1 capsid shells.

Authors:  Jewell N Walters; Gerry L Sexton; J Michael McCaffery; Prashant Desai
Journal:  J Virol       Date:  2003-04       Impact factor: 5.103

6.  A domain in the herpes simplex virus 1 triplex protein VP23 is essential for closure of capsid shells into icosahedral structures.

Authors:  Hong Seok Kim; Eugene Huang; Jigisha Desai; Marieta Sole; Erin N Pryce; Mercy E Okoye; Stanley Person; Prashant J Desai
Journal:  J Virol       Date:  2011-09-28       Impact factor: 5.103

7.  Reconstitution of herpes simplex virus type 1 nuclear capsid egress in vitro.

Authors:  Gaudeline Rémillard-Labrosse; Ginette Guay; Roger Lippé
Journal:  J Virol       Date:  2006-10       Impact factor: 5.103

8.  The herpes simplex virus type 1 DNA packaging protein UL17 is a virion protein that is present in both the capsid and the tegument compartments.

Authors:  Johanna K Thurlow; Frazer J Rixon; Mary Murphy; Paul Targett-Adams; Michelle Hughes; Valerie G Preston
Journal:  J Virol       Date:  2005-01       Impact factor: 5.103

9.  Involvement of the portal at an early step in herpes simplex virus capsid assembly.

Authors:  William W Newcomb; Fred L Homa; Jay C Brown
Journal:  J Virol       Date:  2005-08       Impact factor: 5.103

10.  Packaging of genomic and amplicon DNA by the herpes simplex virus type 1 UL25-null mutant KUL25NS.

Authors:  N D Stow
Journal:  J Virol       Date:  2001-11       Impact factor: 5.103

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.