Effects of geometric joint constraints on the selection of final arm posture during reaching: a simulation study.

Significant debate exists regarding the neural strategies underlying the positioning and orienting of the hand during voluntary reaching movements of the human upper extremity. Some authors have suggested that positioning and orienting are controlled independently, while others have argued that a strong interdependence exists. In an effort to address this uncertainty, our study employed computer simulations to examine the impact of physiological limitations of joint rotation on the proposed independence of hand position and orientation. Specifically, we analyzed the effects of geometric constraints on final arm postures using a 7 degree-of-freedom model of the human arm. For 20 different hand configurations within the attainable workspace, we computed sets of achievable joint angles by applying inverse kinematics. From each set, we then calculated the locus of possible elbow positions for the particular final hand posture. When the joints were allowed 360 degrees of rotation, the loci formed complete circles; however, when joint ranges were limited to physiological values, the extent of the loci decreased to an average arc angle of 54.6 degrees (+/-27.9 degrees). Imposition of joint limits also led to practically linear relationships between joint angles within a solution set. These theoretical results suggest a requirement for coordinated interaction between control of the joints associated with hand position and those involved with hand orientation in order to ensure attainable joint trajectories. Furthermore, it is conceivable that some of the correlations observed between joint angles in the course of natural reaching movements result from geometric constraints.