Effect of fat reduction on chemical composition, proteolysis, functionality, and yield of Mozzarella cheese.

Mozzarella cheese was made from skim milk standardized with cream (unhomogenized, 40% milk fat) to achieve four different target fat percentages in the cheese (ca. 5, 10, 15, and 25%). No statistically significant differences were detected for cheese manufacturing time, stretching time, concentration of salt in the moisture phase, pH, or calcium as a percentage of the protein in the cheese between treatments. As the fat percentage was reduced, there was an increase in the moisture and protein content of the cheese. However, because the moisture did not replace the fat on an equal basis, there was a significant decrease in the moisture in the nonfat substance in the cheese as the fat percentage was reduced. This decrease in total filler volume (fat plus moisture) was associated with an increase in the hardness of the unmelted cheese. Whiteness and opacity of the unmelted cheese decreased as the fat content decreased. Pizza baking performance, meltability, and free oil release significantly decreased as the fat percentage decreased. The minimum amount of free oil release necessary to obtain proper functionality during pizza baking was between 0.22 and 2.52 g of fat/100 g of cheese. Actual cheese yield was about 30% lower for cheese containing 5% fat than for cheese with 25% fat. Maximizing fat recovery in the cheese becomes less important to maintain high cheese yield, and moisture control and the retention of solids in the water phase become more important as the fat content of the cheese is reduced.