Literature DB >> 10206612

Evaluation of selected ultralight manual wheelchairs using ANSI/RESNA standards.

R A Cooper1, M L Boninger, A Rentschler.   

Abstract

OBJECTIVES: To provide data for clinicians and wheelchair users to compare the durability, strength, stability, and cost effectiveness of four different ultralight wheelchair models, and to compare the results of this study with those published for lightweight wheelchairs.
DESIGN: Standards testing and cost-effectiveness analysis of four wheelchair models from different manufacturers (12 wheelchairs total).
RESULTS: There were significant differences (p< or =.05) in the fatigue life and value (equivalent cycles per dollar) among the ultralight wheelchairs tested. There was also a significant difference (p< or =.05) in rearward stability tilt angle for the least and most stable configurations. There were no differences in forward and lateral stability. The ultralight wheelchairs (1,009,108 cycles) had significantly (p< or =.05) higher fatigue lives than previously reported for lightweight wheelchairs (187,370 cycles). The lightweight wheelchairs had a mean value of 210 cycles per dollar compared to 673 cycles per dollar for the ultralight wheelchairs. The difference in value for the lightweight and ultralight wheelchairs was statistically significant (p< or =.05).
CONCLUSION: There were differences in the fatigue life and value among the four models of ultralight manual wheelchairs tested. This indicates that ultralight manual wheelchairs are not all of equal quality. The fatigue life and value of the ultralight manual wheelchairs were significantly higher than those previously reported for lightweight manual wheelchairs. This indicates that ultralight wheelchairs may be of higher quality than lightweight manual wheelchairs. Clinicians and consumers should seriously consider selecting an ultralight manual wheelchair to meet their wheelchair mobility needs.

Mesh:

Year:  1999        PMID: 10206612     DOI: 10.1016/s0003-9993(99)90287-3

Source DB:  PubMed          Journal:  Arch Phys Med Rehabil        ISSN: 0003-9993            Impact factor:   3.966


  6 in total

1.  Comparison of High-Strength Aluminum Ultralight Wheelchairs Using ANSI/RESNA Testing Standards.

Authors:  Benjamin Gebrosky; Jonathan Pearlman; Rory Cooper
Journal:  Top Spinal Cord Inj Rehabil       Date:  2017-11-20

2.  Evidence-Based Strategies for Preserving Mobility for Elderly and Aging Manual Wheelchair Users.

Authors:  Philip S Requejo; Jan Furumasu; Sara J Mulroy
Journal:  Top Geriatr Rehabil       Date:  2015 Jan-Mar

3.  Factors Influencing Incidence of Wheelchair Repairs and Consequences Among Individuals with Spinal Cord Injury.

Authors:  Lynn A Worobey; Allen W Heinemann; Kim D Anderson; Denise Fyffe; Trevor A Dyson-Hudson; Theresa Berner; Michael L Boninger
Journal:  Arch Phys Med Rehabil       Date:  2021-04-09       Impact factor: 3.966

4.  Developing product quality standards for wheelchairs used in less-resourced environments.

Authors:  Anand Mhatre; Daniel Martin; Matt McCambridge; Norman Reese; Mark Sullivan; Don Schoendorfer; Eric Wunderlich; Chris Rushman; Dave Mahilo; Jon Pearlman
Journal:  Afr J Disabil       Date:  2017-09-08

5.  Design and evaluation of a laboratory-based wheelchair castor testing protocol using community data.

Authors:  Anand Mhatre; Norman Reese; Jon Pearlman
Journal:  PLoS One       Date:  2020-01-10       Impact factor: 3.240

6.  Development of wheelchair caster testing equipment and preliminary testing of caster models.

Authors:  Anand Mhatre; Joseph Ott; Jonathan Pearlman
Journal:  Afr J Disabil       Date:  2017-09-28
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.