[Effect of methods of sterilization on thermoplastics with special reference to modified surfaces].

For materials intended for use in the medical setting their sterilizability is an indispensable prerequisite. In the case of most polymers the usual sterilization methods result in changes that even extend to cleavage of the polymer chains. A particular problem in this respect are the surfaces modified for improved biocompatibility investigated in the present study, which are characterised by enlarged contact areas. For this reason, possible changes to three different thermoplastics commonly used for medical applications (polyethylene, thermoplastic polyurethane, polycarbonate) were investigated. Steam, gas and radiation were used for sterilization. Tensile tests were employed to identify changes in mucosal characteristics caused by different sterilization techniques irrespective of the surface modification. Sterilization-related changes to the structure of the modified surfaces were investigated with the scanning electron microscope (SEM). Differential thermo analysis (DTA) was used to determine changes in the thermal characteristics of the plastics. Clear tendencies with regard to the behaviour of the plastics after sterilization with various techniques were found. A general statement about the compatibility of plastic materials with a specific sterilization method is not possible on the basis of this study. For every new polymeric product used for medical purposes, the characteristics required must first be defined and compliance with the permissible variations of these characteristics investigated for each of the various sterilization techniques available.