Literature DB >> 10099282

Specific heat flow rate: an on-line monitor and potential control variable of specific metabolic rate in animal cell culture that combines microcalorimetry with dielectric spectroscopy.

Y Guan1, P M Evans, R B Kemp.   

Abstract

One of the requirements for enhanced productivity by the animal culture systems used in biotechnology is the direct assessment of the metabolic rate by on-line biosensors. Based on the fact that cell growth is associated with an enthalpy change, it is shown that the specific heat flow rate is stoichiometrically related to the net specific rates of substrates, products, and indeed to specific growth rate, and therefore a direct reflection of metabolic rate. Heat flow rate measured by conduction calorimetry has a technical advantage over estimates for many material flows which require assays at a minimum of two discrete times to give the rate. In order to make heat flow rate specific to the amount of the living cellular system, it would be advantageous to divide it by viable biomass. This requirement has been fulfilled by combining a continuous flow microcalorimeter ex situ with a dielectric spectroscope in situ, the latter measuring the viable cell mass volume fraction. The quality of the resulting biosensor for specific heat flow rate was illustrated using batch cultures of Chinese hamster ovary cells (CHO 320) producing recombinant human interferon-gamma (IFN-gamma) during growth in a stirred tank bioreactor under fully aerobic conditions. The measuring scatter of the probe was decreased significantly by applying the moving average technique to the two participant signals. It was demonstrated that the total metabolic rate of the cells, as indicated by the specific heat flow rate sensor, decreased with increasing time in batch culture, coincident with the decline in the two major substrates, glucose and glutamine, and the accumulation of the by-products, ammonia and lactate. Furthermore, the specific heat flow rate was an earlier indicator of substrate depletion than the flow rate alone. The calorimetric-respirometric ratio showed the intensive participation of anaerobic processes during growth and the related IFN-gamma production. Specific heat flow rate was monotonically related to specific cell growth rate and associated with specific IFN-gamma production. Specific heat flow rate is potentially a valid control variable for the growth of genetically engineered cell lines producing target proteins. Copyright 1998 John Wiley & Sons, Inc.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 10099282     DOI: 10.1002/(sici)1097-0290(19980605)58:5<464::aid-bit2>3.0.co;2-b

Source DB:  PubMed          Journal:  Biotechnol Bioeng        ISSN: 0006-3592            Impact factor:   4.530


  8 in total

1.  On-line monitoring of responses to nutrient feed additions by multi-frequency permittivity measurements in fed-batch cultivations of CHO cells.

Authors:  Sven Ansorge; Geoffrey Esteban; Georg Schmid
Journal:  Cytotechnology       Date:  2010-04-21       Impact factor: 2.058

2.  Optimization and control of perfusion cultures using a viable cell probe and cell specific perfusion rates.

Authors:  Jason E Dowd; Anthea Jubb; K Ezra Kwok; James M Piret
Journal:  Cytotechnology       Date:  2003-05       Impact factor: 2.058

3.  On-line heat flux measurements improve the culture medium for the growth and productivity of genetically engineered CHO cells.

Authors:  Y H Guan; R B Kemp
Journal:  Cytotechnology       Date:  1999-07       Impact factor: 2.058

4.  On-line monitoring of infected Sf-9 insect cell cultures by scanning permittivity measurements and comparison with off-line biovolume measurements.

Authors:  Sven Ansorge; Geoffrey Esteban; Georg Schmid
Journal:  Cytotechnology       Date:  2007-10-11       Impact factor: 2.058

5.  On-line Measurements and Control of Viable Cell Density in Cell Culture Manufacturing Processes using Radio-frequency Impedance.

Authors:  John P Carvell; Jason E Dowd
Journal:  Cytotechnology       Date:  2006-06-23       Impact factor: 2.058

Review 6.  Biomass measurement online: the performance of in situ measurements and software sensors.

Authors:  Kristiina Kiviharju; Kalle Salonen; Ulla Moilanen; Tero Eerikäinen
Journal:  J Ind Microbiol Biotechnol       Date:  2008-04-08       Impact factor: 3.346

7.  Introducing process analytical technology (PAT) in filamentous cultivation process development: comparison of advanced online sensors for biomass measurement.

Authors:  Nanna Petersen Rønnest; Stuart M Stocks; Anna Eliasson Lantz; Krist V Gernaey
Journal:  J Ind Microbiol Biotechnol       Date:  2011-04-02       Impact factor: 3.346

8.  A soft sensor for bioprocess control based on sequential filtering of metabolic heat signals.

Authors:  Dan Paulsson; Robert Gustavsson; Carl-Fredrik Mandenius
Journal:  Sensors (Basel)       Date:  2014-09-26       Impact factor: 3.576

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.