Literature DB >> 10036651

Colour stereolithography for planning complex maxillofacial tumour surgery.

C Kermer1, M Rasse, G Lagogiannis, G Undt, A Wagner, W Millesi.   

Abstract

High-precision anatomical facsimile models of the patients' skulls, individually produced by colour stereolithography, were used in the preoperative planning for seven patients with complex maxillofacial tumours. Selectively coloured models facilitated the management of ablative surgery and reconstructive procedures as well. The indicators for preoperative colour stereolithographic model planning concerning maxillofacial tumour surgery are discussed.

Entities:  

Mesh：

Year:  1998        PMID： 10036651     DOI： 10.1016/s1010-5182(98)80068-1

Source DB:  PubMed          Journal:  J Craniomaxillofac Surg        ISSN： 1010-5182            Impact factor:   2.078


  6 in total

1.  Experience with the use of prebent plates for the reconstruction of mandibular defects.

Authors:  Martin I Salgueiro; Mark R Stevens
Journal:  Craniomaxillofac Trauma Reconstr       Date:  2010-12

Review 2.  Automating the processing steps for obtaining bone tissue-engineered substitutes: from imaging tools to bioreactors.

Authors:  Pedro F Costa; Albino Martins; Nuno M Neves; Manuela E Gomes; Rui L Reis
Journal:  Tissue Eng Part B Rev       Date:  2014-07-31       Impact factor: 6.389

3.  Mandible reconstruction with patient-specific pre-bent reconstruction plates: comparison of a transfer key method to the standard method--results of an in vitro study.

Authors:  Frank Wilde; Marcus Plail; Christoph Riese; Alexander Schramm; Karsten Winter
Journal:  Int J Comput Assist Radiol Surg       Date:  2011-05-19       Impact factor: 2.924

4.  [Rapid prototyping in planning reconstructive surgery of the head and neck. Review and evaluation of indications in clinical use].

Authors:  J S Bill; J F Reuther
Journal:  Mund Kiefer Gesichtschir       Date:  2004-03-16

5.  Feasibility of preoperative planning using anatomical facsimile models for mandibular reconstruction.

Authors:  Corrado Toro; Massimo Robiony; Fabio Costa; Nicoletta Zerman; Massimo Politi
Journal:  Head Face Med       Date:  2007-01-15       Impact factor: 2.151

Review 6.  Maintaining safety and efficacy for 3D printing in medicine.

Authors:  Andy Christensen; Frank J Rybicki
Journal:  3D Print Med       Date:  2017-01-26
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.